4662 and 4672 are (I think) the "standard" ports and aren't specific to any flavor of eMule. Some ISPs block or throttle those ports, along with other bandwidth-eaters. That's why you'd use non-standard ports. In my case, I'm using port 16047 for TCP and port 16062 for UDP.ForAnAngel wrote:Maybe if you tried different port numbers? I think 4662 and 4672 were for an older version of eMule, so if you have a more recent version then you probably have to use different numbers. I have 0.50a and I'm using 48809 and 40301. Of course there's a very good chance that I don't know what I'm talking about and what I'm saying is not true.
help for newbie with eMule
- Phuzzy4242
- Site Admin
- Posts: 7686
- Likes: 31837
- Joined: Sun Aug 23, 2009 1:00 am
Re: help for newbie with eMule
- ptguardian
- Posts: 4479
- Likes: 14803
- Joined: Wed Sep 17, 2008 1:00 am
Re: help for newbie with eMule
LOLForAnAngel wrote:Of course there's a very good chance that I don't know what I'm talking about and what I'm saying is not true.
that could apply to all of us and about everything
-
Guest
Re: help for newbie with eMule
ptguardian: >>"if you are getting anything on emule it means you have it working. under the transfers screen look at the bottom right corner. does it say eD2k:connected/Kad connected? next to that the little round icon is it green or is it red or half and half?"<<
yes, the little globe icon at the bottom left of the window is green (both arrows). Where would it tell me that eD2K or Kad is connected... I cannot see that in my window.
LOL ForAnAngel: >>"Of course there's a very good chance that I don't know what I'm talking about and what I'm saying is not true."<< I agree wholeheartedly.... it's probably true about everything... at my age I am still learning things.

yes, the little globe icon at the bottom left of the window is green (both arrows). Where would it tell me that eD2K or Kad is connected... I cannot see that in my window.
LOL ForAnAngel: >>"Of course there's a very good chance that I don't know what I'm talking about and what I'm saying is not true."<< I agree wholeheartedly.... it's probably true about everything... at my age I am still learning things.
Re: help for newbie with eMule
Just to explain the biggest reason why HighID affects download time and is worth figuring out...
If you have a HighID, other clients can connect to you when they they are ready to upload to you, i.e. when you have reached the top of their queue and they have bandwidth available. The upload begins immediately.
But if you have a LowID, the only time a transfer can start is when you connect to them, which eMule does every 29 minutes. So when you connect to them but they don't have bandwidth available for you at that moment, they say "try again later" and you try again in another 29 minutes... when you may get the same answer... which significantly slows the process.
Another factor: LowID-to-LowID transfers are possible but not reliable, so a LowID cuts down the number of sources you can download from.
At any given point half the users in my queue have LowIDs, not because half of all people have LowIDs, but because the HighID users get what they want and are gone while the LowIDers hang around a long time...
If you have a HighID, other clients can connect to you when they they are ready to upload to you, i.e. when you have reached the top of their queue and they have bandwidth available. The upload begins immediately.
But if you have a LowID, the only time a transfer can start is when you connect to them, which eMule does every 29 minutes. So when you connect to them but they don't have bandwidth available for you at that moment, they say "try again later" and you try again in another 29 minutes... when you may get the same answer... which significantly slows the process.
Another factor: LowID-to-LowID transfers are possible but not reliable, so a LowID cuts down the number of sources you can download from.
At any given point half the users in my queue have LowIDs, not because half of all people have LowIDs, but because the HighID users get what they want and are gone while the LowIDers hang around a long time...
- ptguardian
- Posts: 4479
- Likes: 14803
- Joined: Wed Sep 17, 2008 1:00 am
Re: help for newbie with eMule
Guest what version of emule are you using?
-
Guest
Re: help for newbie with eMule
ptguardian:
Thanks for your help... I am using eMule Plus v1.2e... the little globe icon at the bottom right now shows both arrows as yellow after rebooting the pc! Not good??
Thanks for your help... I am using eMule Plus v1.2e... the little globe icon at the bottom right now shows both arrows as yellow after rebooting the pc! Not good??
- ptguardian
- Posts: 4479
- Likes: 14803
- Joined: Wed Sep 17, 2008 1:00 am
Re: help for newbie with eMule
you have a version of emule i have not used so i can't help as much as others here can. i like the older versions myself. i currently use v0.48a.Guest wrote:ptguardian:
Thanks for your help... I am using eMule Plus v1.2e... the little globe icon at the bottom right now shows both arrows as yellow after rebooting the pc! Not good??
i suggested you start this thread because i know several people here have a great amount of knowledge with emule and like to show it off. unfortunately they tend to over explain themselves and forget that all this tech stuff is like a foreign language to a newbie. this over explaining can also be good because those of us at an intermediate level also get to learn new tweaks.
if you are still having trouble after everyone here helps you on your current problem. try to install a different version and start over.
emule can take awhile but it is very rewarding. all of us at FLM love its longevity that other p2p programs can't match
-
Guest
Re: help for newbie with eMule
Last night I finally figured out the Simple Port Forwarding application and managed to forward the two ports (numbers suggested here - 16047 and 16062). It's now working amazingly well... No more LowID messages; a much, much quicker connection to the servers, and downloads zinging along happily (even with a low number of sources); and two green arrows on the little Globe icon - meaning I am now connected with a HIGH ID!!!
There is a really good web page that explains the meaning of the eMule icons if you are using a newer version of eMule (like the eMule Plus v1.2e that I am currently using) - it is here
http://emuleplus.info/forum/index.php?s ... Icons,1733
I did put a film into my public share folder to test if sharing is also ok.... maybe some FLM members can look for the file to see if it is available for sharing... please do a search for
Le Papillon [2002].rar
and let me know if you can see it. (By the way, that .rar file contains a nice copy of Le Papillon without the hardsubs on the screen, a nicely working sub file and pictures/info about that little gem of a film - if you download it you will need to use WinRar to unpack it, NOT WinZip!).
ForAnAngel wrote:
That was the most kind piece of advice given... and it was helpful, too. It encouraged me to struggle along in the fog of my lack of knowledge and experience!!"Of course there's a very good chance that I don't know what I'm talking about and what I'm saying is not true."
TY all for all your help.
- ptguardian
- Posts: 4479
- Likes: 14803
- Joined: Wed Sep 17, 2008 1:00 am
Re: help for newbie with eMule
*****
*****
- For An Angel
- Posts: 658
- Likes: 3783
- Joined: Sat Jan 02, 2010 1:00 am
Re: help for newbie with eMule
lol That made my dayGuest wrote:ForAnAngel wrote:
That was the most kind piece of advice given... and it was helpful, too. It encouraged me to struggle along in the fog of my lack of knowledge and experience!!"Of course there's a very good chance that I don't know what I'm talking about and what I'm saying is not true."![]()
TY all for all your help.![]()
![]()