Re: [REL] Domenica (2001)
Posted: Thu Jul 29, 2021 1:30 am
FYI - encoding settings I use are:
I rarely rip - but now it's easier to use DVD Shrink and have it do a full disc backup to your HDD.
I used this guide to get started 20 odd years ago... https://www.afterdawn.com/guides/archiv ... orphic.cfm
Audacity to up the audio levels. Often DVD audio is very low (to allow for dynamic range, ie. very loud bangs)... but is often too low (unlike say Youtube adverts) and won't spike above a very low -3Db. Digital audio can be pushed to -0.1 without clipping, but I tend to use -0.9Db. This is loud without being harsh-loud. Then save the WAV. WAV -> MP3 at 160kbit via RazorLame (if 128kbit is minimum CD quality, then 160kbit should be fine).
Topaz the video... Importantly don't final encode the video in Topaz - so encode to MP4 at a super-high quality setting of 1-4 (depending on the Gigabytes you want to make the temp file!!) If the DVD has interlacing I deinterlace in VirtualDub - saving it out as an uncompressed AVI (about 200GB). If you Deinterlace in Topaz you limit your options on what filters you can use. Importantly encode in Topaz to a high quality file (eg quality =4), and do the final video encode in Handbrake.
Topaz for me is slow on my 1660, 6gb RAM card a DVD -> 720p runs about 0.3seconds per frame or 8 hours per hour of film!
Handbrake: Filters=none. Video tab: Framerate="same as source + constant". Constant quality 18.5q (or 21 for 1080p). Profile: Main. No encoding tune (film increases the file size, but i can't see the benefit). Level 4.1 (otherwise it won't play on some hardware). Slow (otherwise some psycho-visual enhancements aren't enabled... so I read). Average bitrate and 2pass turned off. The speed seems to affect filesize more than visual appearance. You gain about 10% from SLOW -> VERY FAST.
Extra options "vbv-maxrate=5500:vbv-bufsize=1500" (video limit of 5500kbit with a 1500kbit buffer. This stops the video spiking to 1mb+/second on scenes that we don't care about, moving water, fast panning, and would not even see the noise). I tested a "moving water" scene and got 13mb for 15seconds with it off. 8mb for 15seconds with it on... could barely see a difference.
I don't know how "experts" get 720p films down to 750mb and make them look decent! But I am very pleased with the above settings.
I rarely rip - but now it's easier to use DVD Shrink and have it do a full disc backup to your HDD.
I used this guide to get started 20 odd years ago... https://www.afterdawn.com/guides/archiv ... orphic.cfm
Audacity to up the audio levels. Often DVD audio is very low (to allow for dynamic range, ie. very loud bangs)... but is often too low (unlike say Youtube adverts) and won't spike above a very low -3Db. Digital audio can be pushed to -0.1 without clipping, but I tend to use -0.9Db. This is loud without being harsh-loud. Then save the WAV. WAV -> MP3 at 160kbit via RazorLame (if 128kbit is minimum CD quality, then 160kbit should be fine).
Topaz the video... Importantly don't final encode the video in Topaz - so encode to MP4 at a super-high quality setting of 1-4 (depending on the Gigabytes you want to make the temp file!!) If the DVD has interlacing I deinterlace in VirtualDub - saving it out as an uncompressed AVI (about 200GB). If you Deinterlace in Topaz you limit your options on what filters you can use. Importantly encode in Topaz to a high quality file (eg quality =4), and do the final video encode in Handbrake.
Topaz for me is slow on my 1660, 6gb RAM card a DVD -> 720p runs about 0.3seconds per frame or 8 hours per hour of film!
Handbrake: Filters=none. Video tab: Framerate="same as source + constant". Constant quality 18.5q (or 21 for 1080p). Profile: Main. No encoding tune (film increases the file size, but i can't see the benefit). Level 4.1 (otherwise it won't play on some hardware). Slow (otherwise some psycho-visual enhancements aren't enabled... so I read). Average bitrate and 2pass turned off. The speed seems to affect filesize more than visual appearance. You gain about 10% from SLOW -> VERY FAST.
Extra options "vbv-maxrate=5500:vbv-bufsize=1500" (video limit of 5500kbit with a 1500kbit buffer. This stops the video spiking to 1mb+/second on scenes that we don't care about, moving water, fast panning, and would not even see the noise). I tested a "moving water" scene and got 13mb for 15seconds with it off. 8mb for 15seconds with it on... could barely see a difference.
I don't know how "experts" get 720p films down to 750mb and make them look decent! But I am very pleased with the above settings.